Page 321 - Catalog 2018_update

Section 10 • Lighting • 319

Complete W/O 421 Sealed Light Flush-Mount Stop,
License Light Turn & Tail Light Section 10 • Lighting

Sealed, oval stop, turn, and tail light may be used on
both curbside and roadside of vehicle or trailer. Legal in
either horizontal or vertical position for both U.S. and ECE
applications. Polycarbonate lens is welded to housing to
form single unit. Requires mounting grommet and 3-wire
plug to complete installation. 12-volt lamps designed
with dual-filament, 2.1/.59 amp, 32/3 cp bulb. Measures Two wire, has a bonded steel housing and black enamel
Seven function light-stop, tail, side marker, turn signal, approx. finish. Brass socket and Lexid lens gasket. Flush mounts
license illuminator. Non corrosive plastic housing mounts 6-1/2" L x 2-1/4" W x 2-3/8" D. directly to trailer with recessed lens. 5 1/2" O.D. x 1 5/8"
on 2" centers. Uses 1157 bulb for turn & tail, #57 for 210681 M421R Red $5.95 depth with 4 1/2" diameter mounting holes. Stop, turn and
marker light. Dimensions: 5" W x 4-1/2" H x 2-7/8" D. tail light. Red lens.
210756 440 Complete W/O License Light $7.48 210691 M413 Flush Mount Red $9.96
210954 440L Light W/License Illumination $8.17 210692 410-15R Red Repl. Lens $2.76

Oval Turn Signal

Tail Light Lens #428 Stop/Tail Light

Sealed, oval turn signal light meets DOT requirements
in either horizontal or vertical mounting position.
Polycarbonate lens is welded to housing to form single
unit. Requires mounting grommet and 3-wire plug to
complete installation. Kits include light, grommet, and
right-angle plug. Both EF and ER are for ECE applications Stud-mount, combination tail light that functions as stop,
Combination tail lamp for trailers over 80" wide that need turn, tail, and license light (428 or 428W only). Features
extended side marker lamps. Dimensions: 5-3/4" W x only with single filament. "EF" denotes front turn signal; 3 3/4" diameter wrap-over lens retained by two screws,
4-1/2" H x 2-7/8" D. "ER" denotes rear turn signal; "24V" denotes 24-volt black plastic housing, and two 10" lead wires. Mounts with
210747 440-15 Red Lens $2.95 light. See 421R stop and tail, and 416 back-up light for two 1/4" studs on 2" centers. Grounds through mounting
companion models. 12-volt non-ECE lamps designed
with dual-filament, 2.1/.59 amp, 32/3 cp bulb. hardware.
210768 M421A Oval Turn Signal Light, $5.99 210771 V428 Red W/License Light $8.09
Amber 210955 428S Red W/O License Light $8.14
210796 421KR Oval Turn Signal Light, Red $9.40 210677 420-15 Red Replacement Lens $2.19

Backup Light

Mounting Bracket

Round Taillight

Sealed, oval back-up light meets DOT requirement in
either horizontal or vertical position. Polycarbonate lens
is sonic welded to housing to form single unit. Requires Black powder coated steel bracket. Oval lights and with
mounting grommet and 2-wire plug to complete other similar lights. May be bolted or welded in either
installations. "24V" denotes 24-volt light. Kits include light, horizontal or vertical position. Black PVC grommet Sonically sealed, waterproof. Shock-proof socket
grommet, and right angle plug. 12-volt lamps designed flush mount oval style lamps. Provides additional shock guarantees long bulb life. Accepts standard PL-3 plug.
with single filament, 2.1 amp, 32 cp bulb. absorbency to extend lamp life. 210992 ST45RB Red Stop/Turn/Tail $3.50
210958 M416 Clear Back Up Light $6.81 210764 421-09 Bracket $6.45 Light W/PL-3 Connection

PRICES SUBJECT TO CHANGE WITHOUT NOTICE SPECIAL ORDER