Page 657 - Catalog 2018_update

654 • Suspension • Section 20 Section 20 • Suspension • 655

Section 20 • Suspension

YEAR MAKE/MODEL MFG# ARROW# MFG# ARROW#
Suspension • Section 20
UNIVERSAL LOWER OVERLOAD UPPER OVERLOAD
Universal Truck/SUV/Van/RV/Commercial, etc A7311 (2,4) 730008 A7202 (3) 730011
FORD
00-11 Ranger A7311 (2,4) 730008 - -
81-09 F150/250/350/450 A7311 (2,4) 730008 A7200 (3) 730010
10-17 F150 A7310 (1,4) 730012 A7200 (3) 730010
99-05 Excursion A7310 (1,4) 730012 - -
10-16 F250/350/450 A7310 (1,4) 730012 A7200 (3) 730010
00-16 F350/450/550 Cab and Chassis - - A7200 (3) 730010
01-08 E150 Van A7311 (2,4) 730008 - -
05-11 E250/E350 Van A7311 (2,4,5) 730008 - -
12-13 E250/E350 Van A7310 (1,4,5) 730012 - -
2017 F250/350 A7311 (2,4,5) 730008 A7200 (3) 730010
DODGE
95-08 1500 A7311 (2,4) 730008 - -
95-13 2500/3500/4500 A7311 (2,4,8) 730008 A7200 (3,8) 730010
14-15 3500/4500 Factory Bed A7311 (2,4,8) 730008 A7200 (3,8) 730010
14-15 4500/5500 Cab and Chassis - - A7200 (3) 730010
13-17 3500 A7311 (2,4,8) 730008 A7200 (3,8) 730010
87-10 Dakota A7311 (2,4) 730008 - -
CHEVROLET/GMC
00-13 2500 Suburban/YukonXL A7310 (1,4) 730012 - -
All Canyon/Colorado/S10/Sonoma A7311 (2,4) 730008 - -
88-14 1500 trucks A7310 (1,4) 730012 - -
15-17 1500 trucks A7310 (1,4,7) 730012 - -
88-10 3500 trucks A7310 (1,4) 730012 - -
11-15 3500 trucks - - A7202 (3) 730011
16-17 3500 trucks A7310 (1,4) 730012 A7202 (3) 730011
88-17 2500 trucks A7310 (1,4) 730012 - -
All Express/Savana 2500/3500 A7310 (1,4,5) 730012 - -
2017 1500 trucks (5.5ft & 6.5 ft bed ONLY) A7310 (1,2) 730012 - -
TOYOTA
All Tacoma A7311 (2,4) 730008 - -
All Tundra A7311 (2,4) 730008 - -
NISSAN
All Frontier A7311 (2,4) 730008 - -
All Xterras A7311 (2,4) 730008 - -
All Titan A7311 (2,4,6) 730008 - -
All NV 2500/3500 A7311 (2,4) 730008 - -
HUMMER
All H3 SUVs A7311 (2,4) 730008 - -
MERCEDES
11-13 Sprinter 2500/3500 A7311 (2,4) 730008 - -
StableLoad Footnotes
1 A7310 StableLoad is a NO-DRILL APPLICATION and requires factory predrilled 1/2" diameter holes in lower overload spring. The A7310 Quick Disconnect StableLoad is designed for
vehicles that have a lower overload leaf suspension with a hole near each end of the lower overload spring. The lower overload will, for the most part be shorter, thicker and will generally
have separation from the rest of the spring pack. In most cases, there will be a plastic disc covering the hole in question.
2 A7311 (WITH DRILL KIT) will fit any passenger or commercial vehicle, van, SUV, truck, RV etc. with rear leaf springs and lower overload spring. The lower overload leaf can be identified
by being on the very bottom of the spring pack, being thicker than the rest of the leaf springs in the spring pack and generally speaking having a gap between the lower overload leaf spring
and the upper leaf spring pack. Drilling four 7/16 holes required. Specially treated drill bits and detailed drilling instructions are included. Average drill time is 30-40 minutes for complete
installation. Many factory overload springs come predrilled with 1/2" holes. Therefore drilling holes in the overload springs in the same factory locations found on vehicles with predrilled
holes will have no affect on your springs integrity or operation. The drilled springs (when drilled in accordance with the Torklift International drilling specifications) and the integrity of the
springs once drilled are covered under the Lifetime Torklift International Warranty. Some overload springs may have adhesive padding on top of the overload spring. Use a screwdriver or
equivalent to remove the padding. This will ensure proper rotation and ease of use. NEW: Drill a leaf spring in less than 37 seconds with the StableLoad Drill Tool now available through the
manufacturer. Call for Details.
3 The A7200, A7202 is a NO-DRILL APPLICATION and must have factory installed upper overload. Will not work in conjunction with Supersprings. Due to factory overload engagement
design, some applications have progressive engagement, where rear springs will contact first. Drilling of rubber pad on some older Dodge applications may be required. Depending on the
vehicle model, suspension package, and condition, actual distance between the StableLoad and vehicle frame overload contact bracket may vary. In some rare instances, when the vehicle
is not carrying a load, the StableLoad may come into contact on occasion due to rough road conditions and other anomalies. #A7201 Spacer kit is available for vehicles that need additional
spacing for the StableLoad to contact the overload spring.
4 On Quick Disconnect StableLoad (part#'s A7310/A7311) due to wear and tear after time, some vehicles leaf springs may have minimal clearance with the lower overload for StableLoad
engagement / disengagement when the vehicle is unloaded. In order for the StableLoad to engage and disengage with minimal effort, a minimum gap of 1/8" is required between the lower
overload and the spring pack.
5 There is no fit for the 3500/E350 Cab and Chassis.
6 If your Nissan Titan has an Axle wrap bracket located at the rear of the lower leaf spring, A7310/A7311 StableLoads may only be installed on the forward end of the driver and passenger
leaf springs.
7 Due to clearance issues, the StableLoad will only work on the rear of the spring.
8 Will not work with factory installed airbags on 3500 trucks. This is due to the lack of both upper and lower overload springs.
*Applies only to the StableLoad Quick Disconnect (Lower Overload)
The latest 2018 part numbers are just a click
away! Visit the online automated application For fast and friendly tech support
guide available 24/7 at TORKLIFT.COM call us at 1-800-246-8132
PRICES SUBJECT TO CHANGE WITHOUT NOTICE SPECIAL ORDER PRICES SUBJECT TO CHANGE WITHOUT NOTICE SPECIAL ORDER