Page 427 - 2019-Catalog-Full

Step 1: Select Your Front Tie Step 2: Optional Step 4: Optional Step 5: Select Your 424
Toyota Downs Select Your Auxiliary Step 3: Select Your Rear Tie Downs Select Your SuperHitch Suspension Stabilizer
Power Product
Front Tie Downs HiddenPower Under Vehicle Rear Tie Downs SuperHitch StableLoad
Battery Mount
Do running
boards Standard Talon Aluminum Your current Standard Rear Tie Talon
Year Model Cab Bed ARROW# ARROW# MFG# ARROW# receiver / trailer ARROW# Aluminum Rear ARROW# Hitch Type MFG# ARROW# Overload Type MFG# ARROW#
extend past Front Tie Down Front Tie Down hitch Down Tie Down
the cab?
2013 Tundra Double 8ft No T2305 SO- Factory T3304 730960 Lower Overload A7311 (2,4) 730008
Aftermarket R3500 (12) 730952
2014-2015 Tundra Crew Max 5.5ft No T3307 SO- Factory T3306 SO- Lower Overload A7311 (2,4) 730008
4x4 only Aftermarket R3500 (12) 730952
2014-2015 Tundra Double 6.5ft No T2309 730928 Factory T3306 SO- Lower Overload A7311 (2,4) 730008
4x4 only Aftermarket R3500 (12) 730952
2014-2018 Tundra Double 8ft No T2305 SO- Factory T3306 SO- Lower Overload A7311 (2,4) 730008
4x4 only Aftermarket R3500 (12) 730952 (14-15 only)
2015 Tacoma Double 6ft No T2308 (18) SO- Factory T3303 SO- Lower Overload A7311 (2,4) 730008
4x4 only Aftermarket R3500 (12) 730952
2015 Tacoma Double 5ft Factory T3303 SO- Lower Overload A7311 (2,4) 730008
4x4 only Aftermarket R3500 (12) 730952
2016 Tacoma Double 6ft No T2303 (18) SO- Factory T3307 (20) SO-
4x4 only
2017-2018 Tundra All 6.5ft No T2310 SO- Factory T3306 SO- Lower Overload A7311 (2,4) 730008
4x4 only (2017 only)
2018 Tundra Crew Max 5.5ft No T2311 (22) SO- Factory T3306 SO-
2018 Tundra Access 6ft No T2303 SO- Factory T3307 (20,36) SO- Lower Overload A7311 (2,4) 730008
(2WD only)
2018 Tacoma Double All No T2303 SO- Factory T3307 (20) SO-
2018 Tacoma Double 6ft No T2303 SO- Factory T3307 (20) SO- Lower Overload A7311 (2,4) 730008
4x4 only
StableLoad Footnotes
1 A7310 StableLoad is a NO-DRILL APPLICATION and requires factory predrilled 1/2" diameter holes in lower overload spring. The A7310 Quick
Disconnect StableLoad is designed for vehicles that have a lower overload leaf suspension with a hole near each end of the lower overload spring. CARRIERS & HAULERS • SECTION 14
The lower overload will, for the most part be shorter, thicker and will generally have separation from the rest of the spring pack. In most cases, there
will be a plastic disc covering the hole in question.
2 A7311 (WITH DRILL KIT) will fit any passenger or commercial vehicle, van, SUV, truck, RV etc. with rear leaf springs and lower overload spring.
The lower overload leaf can be identified by being on the very bottom of the spring pack, being thicker than the rest of the leaf springs in the spring
pack and generally speaking having a gap between the lower overload leaf spring and the upper leaf spring pack. Drilling four 7/16” holes required.
Specially treated drill bits and detailed drilling instructions are included. Average drill time is 30-40 minutes for complete installation. Ask about the
new StableLoad Drill Tool that reduces installation time to just 37 seconds per leafspring. Many factory overload springs come predrilled with 1/2”
holes. Therefore drilling holes in the overload springs in the same factory locations found on vehicles with predrilled holes will have no affect on your
springs integrity or operation. The drilled springs (when drilled in accordance with the Torklift International drilling specifications) and the integrity of
the springs once drilled are covered under the Lifetime Torklift International Warranty. Some overload springs may have adhesive padding on top of
the overload spring. Use a screwdriver or equivalent to remove the padding. This will ensure proper rotation and ease of use. StableLoad Drill Tool
available through manufacturer. Call for details.
3 The A7200, A7202 is a NO-DRILL APPLICATION and must have factory installed upper overload. Will not work in conjunction with Supersprings.
Due to factory overload engagement design, some applications have progressive engagement, where rear springs will contact first. Drilling of
rubber pad on some older Dodge applications may be required. Depending on the vehicle model, suspension package, and condition, actual
distance between the StableLoad and vehicle frame overload contact bracket may vary. In some rare instances, when the vehicle is not carrying a
load, the StableLoad may come into contact on occasion due to rough road conditions and other anomalies. #A7201 Spacer kit is available for
vehicles that need additional spacing for the StableLoad to contact the overload spring.
4 On Quick Disconnect StableLoad (Part#'s A7310/A7311) due to wear and tear after time, some vehicles leaf springs may have minimal clearance
with the lower overload for StableLoad engagement / disengagement when the vehicle is unloaded. In order for the StableLoad to engage and
disengage with minimal effort, a minimum gap of 1/8" is required between the lower overload and the spring pack.
5 There is no fit for the 3500/E350 Cab and Chassis.
6 If your Nissan Titan has an Axle wrap bracket located at the rear of the lower leaf spring, A7310/A7311 StableLoads may only be installed on the
forward end of the driver and passenger leaf springs.
7 Due to clearance issues, the StableLoad will only work on the rear of the spring.
8 Will not work with factory installed airbags on 3500 trucks. This is due to the lack of both upper and lower overload springs.
HiddenPower Footnotes
1 Battery box is not included.
2 Requires drilling into the vehicle frame. This is a universal fit application.

SuperHitch Footnotes
1A Rated at 1,500 lbs tongue weight distributing and 15,000 lbs pulling capacity weight distributing.
1B Rated at 2,000 lbs tongue weight distributing and 20,000 lbs pulling capacity weight distributing.
1C Rated at 3,000 lbs tongue weight distributing and 30,000 lbs pulling capacity weight distributing.
1 Spare tire hanger and tailpipe modification may be necessary.
2 May require modification to spare tire hanger.
3 Will only work with factory welded on receiver hitch . PRICES SUBJECT TO CHANGE WITHOUT NOTICE
4 2007 fits only classic body style.
5 Trucks with 34½" cab and chassis frame use F1003; trucks with a 37½" regular pickup frame use F1002.
Not all vehicle fits listed. Go to contact us if your application is not listed. For
6 Works with vehicles that have factory rims and tires 18" and smaller.
footnotes, see last page of app guide.
1H It is not compatible with factory hitch rated to 11,500 lbs.
Hundreds of vehicle fits not listed.
2H Comes with a single receiver that combines with factory hitch.
Go to www.torklift.com if your application is not listed. For footnotes and turnbuckles, see last page of app guide.
The latest 2019 part numbers are just a click
For fast and friendly tech support away! Visit the online automated application For fast and friendly tech support
call us at 1-800-246-8132 guide available 24/7 at TORKLIFT.COM call us at 1-800-246-8132

WARNING: These products can expose you to chemicals, including Carbon Black, Crystalline Silica, Cobalt, Titanium Dioxide, Vanadium, and Nickel SPECIAL ORDER
Compounds, which are known to the State of California to cause cancer and reproductive harm. For more information go to www.P65Warnings.ca.gov