Page 664 - 2019-Catalog-Full

661

SECTION 20 • SUSPENSION

YEAR MAKE/MODEL MFG# ARROW# MFG# ARROW# MFG# ARROW#
UNIVERSAL LOWER OVERLOAD LOWER OVERLOAD UPPER OVERLOAD
(STAINLESS STEEL)
Universal Truck/SUV/Van/RV/Commercial, etc A7311S (2,4) A7311S A7311 (2,4) 730008 A7202 (3) 730011
FORD
00-11 Ranger A7311S (2,4) A7311S A7311 (2,4) 730008 - -
81-09 F150/250/350/450 A7311S (2,4) A7311S A7311 (2,4) 730008 A7200 (3) 730010
10-17 F150 A7310S (1,4) A7310S A7310 (1,4) 730012 A7200 (3) 730010
99-05 Excursion A7310S (1,4) A7310S A7310 (1,4) 730012 - -
10-16 F250/350/450 A7310S (1,4) A7310S A7310 (1,4) 730012 A7200 (3) 730010
00-16 F350/450/550 Cab and Chassis - - - - A7200 (3) 730010
01-08 E150 Van A7311S (2,4) A7311S A7311 (2,4) 730008 - -
05-11 E250/E350 Van A7311S (2,4,5) A7311S A7311 (2,4,5) 730008 - -
12-13 E250/E350 Van A7310S (1,4,5) A7310S A7310 (1,4,5) 730012 - -
17-18 F250/350 A7311S (2,4,5) A7311S A7311 (2,4,5) 730008 A7200 (3) 730010
2018 F250 A7311S (2,4) A7311S A7311 (2,4) 730008 - -
DODGE RAM
95-08 1500 A7311S (2,4) A7311S A7311 (2,4) 730008 - -
95-13 2500/3500/4500 A7311S (2,4,8) A7311S A7311 (2,4,8) 730008 A7200 (3,8) 730010
14-15 3500/4500 Factory Bed A7311S (2,4,8) A7311S A7311 (2,4,8) 730008 A7200 (3,8) 730010
14-15 4500/5500 Cab and Chassis - - - - A7200 (3) 730010
13-17 3500 A7311S (2,4,8) A7311S A7311 (2,4,8) 730008 A7200 (3,8) 730010
2018 3500 A7310S (1,4,8) A7310S A7310 (1,4,8) 730012 - -
87-10 Dakota A7311S (2,4) A7311S A7311 (2,4) 730008 - -
CHEVROLET/GMC
00-13 2500 Suburban/YukonXL A7310S (1,4) A7310S A7310 (1,4) 730012 - -
All Canyon/Colorado/S10/Sonoma A7311S (2,4) A7311S A7311 (2,4) 730008 - -
88-14 1500 trucks A7310S (1,4) A7310S A7310 (1,4) 730012 - -
15-17 1500 trucks A7310S (1,4,7) A7310S A7310 (1,4,7) 730012 - -
88-10 3500 trucks A7310S (1,4) A7310S A7310 (1,4) 730012 - -
11-15 3500 trucks - - - - A7202 (3) 730011
16-18 3500 trucks A7310S (1,4) A7310S A7310 (1,4) 730012 A7202 (3) 730011
88-18 2500 trucks A7310S (1,4) A7310S A7310 (1,4) 730012 - -
All Express/Savana 2500/3500 A7310S (1,4,5) A7310S A7310 (1,4,5) 730012 - -
17-18 1500 trucks (5.5ft & 6.5 ft bed ONLY) A7310S (1,2) A7310S A7310 (1,2) 730012 - -
TOYOTA
All Tacoma A7311S (2,4) A7311S A7311 (2,4) 730008 - -
All Tundra A7311S (2,4) A7311S A7311 (2,4) 730008 - -
NISSAN
All Frontier A7311S (2,4) A7311S A7311 (2,4) 730008 - -
All Xterras A7311S (2,4) A7311S A7311 (2,4) 730008 - -
All Titan A7311S (2,4,6) A7311S A7311 (2,4,6) 730008 - - - -
A7311S (2,4)
NV 2500/3500
A7311 (2,4)
All
730008
A7311S
SPECIAL ORDER MERCEDES H3 SUVs A7311S (2,4) A7311S A7311 (2,4) 730008 - - - -
HUMMER
All
11-13
A7311 (2,4)
Sprinter 2500/3500
A7311S
A7311S (2,4)
730008
StableLoad Footnotes
A7310 StableLoad is a NO-DRILL APPLICATION and requires factory predrilled 1/2" diameter holes in lower overload spring. The A7310 Quick Disconnect StableLoad is designed for vehicles
1
that have a lower overload leaf suspension with a hole near each end of the lower overload spring. The lower overload will, for the most part be shorter, thicker and will generally have separation
from the rest of the spring pack. In most cases, there will be a plastic disc covering the hole in question.
PRICES SUBJECT TO CHANGE WITHOUT NOTICE
2 A7311 (WITH DRILL KIT) will fit any passenger or commercial vehicle, van, SUV, truck, RV etc. with rear leaf springs and lower overload spring. The lower overload leaf can be identified by
being on the very bottom of the spring pack, being thicker than the rest of the leaf springs in the spring pack and generally speaking having a gap between the lower overload leaf spring and the
upper leaf spring pack. Drilling four 7/16” holes required. Specially treated drill bits and detailed drilling instructions are included. Average drill time is 30-40 minutes for complete installation.
Ask about the new StableLoad Drill Tool that reduces installation time to just 37 seconds per leafspring. Many factory overload springs come predrilled with 1/2” holes. Therefore drilling holes in
the overload springs in the same factory locations found on vehicles with predrilled holes will have no affect on your springs integrity or operation. The drilled springs (when drilled in accordance
with the Torklift International drilling specifications) and the integrity of the springs once drilled are covered under the Lifetime Torklift International Warranty. Some overload springs may have
adhesive padding on top of the overload spring. Use a screwdriver or equivalent to remove the padding. This will ensure proper rotation and ease of use. StableLoad Drill Tool available through
manufacturer. Call for details.
3 The A7200, A7202 is a NO-DRILL APPLICATION and must have factory installed upper overload. Will not work in conjunction with Supersprings. Due to factory overload engagement design,
some applications have progressive engagement, where rear springs will contact first. Drilling of rubber pad on some older Dodge applications may be required. Depending on the vehicle model,
suspension package, and condition, actual distance between the StableLoad and vehicle frame overload contact bracket may vary. In some rare instances, when the vehicle is not carrying a load,
the StableLoad may come into contact on occasion due to rough road conditions and other anomalies. #A7201 Spacer kit is available for vehicles that need additional spacing for the StableLoad
to contact the overload spring.
4 On Quick Disconnect StableLoad (part#'s A7310/A7311) due to wear and tear after time, some vehicles leaf springs may have minimal clearance with the lower overload for StableLoad
engagement / disengagement when the vehicle is unloaded. In order for the StableLoad to engage and disengage with minimal effort, a minimum gap of 1/8" is required between the lower
overload and the spring pack.
5 There is no fit for the 3500/E350 Cab and Chassis.
6 If your Nissan Titan has an Axle wrap bracket located at the rear of the lower leaf spring, A7310/A7311 StableLoads may only be installed on the forward end of the driver and passenger leaf
springs.
7 Due to clearance issues, the StableLoad will only work on the rear of the spring.
8 Will not work with factory installed airbags on 3500 trucks. This is due to the lack of both upper and lower overload springs. *Applies only to the StableLoad Quick Disconnect (Lower Overload)
The latest 2019 part numbers are just a click
away! Visit the online automated application For fast and friendly tech support
guide available 24/7 at TORKLIFT.COM call us at 1-800-246-8132