Page 761 - 2019-Catalog-Full

758

Tri-Ball Ball & Pintle Bolt Kit

Mount Kit Hook Hardware bag kit G8(4)

Tri-Ball Ball Mount, 2” Sq. Hollow Shank w/ EA HEX HD 1/-13 CAP
Black 1-7/8”, 2”, & 2-5/16” Balls - Black. Pintle/Ball combination SCR,NUT® 1/2 LK WAS
unit allows to use
740056 80425 Tri-Ball Mount - Black $74.44 either hitch ball or 761139 8520 Bolt Kit - Pintle Hitch $6.89
740057 80426 Tri-Ball Mount - Chrome $82.43 pintle hook, whatever is needed. Spring loaded
locking hook with safety pin. 16,000 Lb. gross
trailer rating and 3,000 Lb. tongue rating.
710817 63012 2-5/16” Ball W/14,000 Lbs. GTW - $120.09
Pintle W/16,000 Lbs. GTW
2” Ball W/10,000 Lbs. GTW - Pintle
Tri-Ball 710818 63011 W/16,000 Lbs. GTW $120.09 Drawbar

Mount Kit One-piece forged
design for safety and
capacity. Alloy steel
Solid shank for 2” receiver tubes. Black welded forging, black powder
steel towing balls. Black powder coated finish. coat finish. 4-hole
(1-7/8”, 2”, and 2-5/16”) on one solid shank. 5 Ton Receiver Mount square mounting plate.
5/8” hitch pin hole. All three towing ball sizes
One-piece pintle hook 710660 BDB1385 Drawbar 3” ID 4-Bolt, 30-Ton $106.75 HITCHES & TOWING • SECTION 22
740058 1802200 Tri Ball Hitch - Black 1-7/8”, 2”, & $60.78 and shank assembly 761181 BDB125015 Drawbar 2-1/2” ID - 4-Bolt, 21-Ton $89.25
2-5/16”
fits 2 inch receivers.
Jaw latch mechanism
includes tethered
latch pin. Drawbar eye
dimensions- 2” to 3” I.D.
Towing Starter Kit with 1-1/4” to1-5/8” diameter section. M.V.L. Cast Eye Coupler
2,000 lbs. M.G.T.W. 10,000 lbs.
Kit Includes: 1-7/8” 761167 RM5P Pintle Hook - 2” to 3” I.D. $89.09 Ductile cast iron
& 2” hitch balls, 1” eye. Formed steel
Shank, Standard channel. 3” I.D. eye.
Ball Mount, 1-9/16” eye section.
Pin and Clip, Eye Capacity: 2,000
6,000 lb Rating - lbs M.V.L. 14,000 lbs.
Interchangeable M.G.T.W. Channel
Hitch Ball System. Pintle Hook 10-Ton Capacity: 12,000 lbs. M.G.T.W.
715615 21349 Towing Starter Kit $59.95
Mounting 761110 B16137 3” Eye, 7 Ton Capacity $35.54
Spring loaded locking
hook with safety pin and
chain. The 63014 has a
20,000 Lb. gross trailer
Pintle Hook weight rating and a 4,000
Lb. gross trailer weight rating and a 6,000 Lb. Eye Ring
Lb. tongue rating. The 63015 has a 30,000
W/ Ball tongue rating. Includes mounting hardware.
8-Ton Combination Pintle 710865 63014 10-Ton $77.44
Hook/Ball Hitch, 2 or 2-5/16” 710866 63015 15-Ton $93.24
Ball, 16000 lbs., Capacity: GTW 16000 lbs / 761162 LW625 Forged Lunette Eye Ring, 3” $23.80
TW 3000. lbs.
710802 BH82516 2-5/16” Ball & Pintle Hook - 8 Ton $72.90
710803 10050 2” Ball & Pintle Hook - 8 Ton $88.70 PRICES SUBJECT TO CHANGE WITHOUT NOTICE
Heavy Duty Pintle Hook

This heavy duty 20 Ton Pintle Hook Mount
Pintle Hook is made to
Pintle Hook mount on commercial Continuous welds. Black
truck body hitch plates
Drop forged. Black powder only. It cannot be used with powder coat finish. High
and low positioning.
coat finish. Forged steel ball. pintle mounts which install Welded support bracket.
Interchangeable hitch balls. into receiver style hitches. Solid shank.
Drawbar eye dimensions: 9/16 inch mounting
2 3/8” to 3” up to 1 9/16” diameter section. hardware required - sold separately.
Capacity: 4,000 lbs Maximum Vehicle Load 710807 PH20 Heavy Duty Pintle Hook, 20-Ton $98.84 SPECIAL ORDER
and 20,000 lbs MGTW. 710809 PH45 Heavy Duty Pintle Hook, 45-Ton $283.00 710021 PM105 Pintle Hook Mount 10”, 3 Positions $59.25
710668 BH102516 2-5/16” Ball $135.44 710811 PH15 Heavy Duty Pintle Hook, 15-Ton $75.46 710808 PM87 Pintle Hook Mount 9”, 4 Positions $47.99