Page 223 - 2024_ArrowCatalog_Complete

DINOSAUR™ CIRCUIT BOARDS 221

Universal Ignitor Board Universal Ignitor Thermistor Simulator

The UIB Series Igniter Board Cover For Norcold
boards are for use in
furnaces, water Tough, clear, fire Refrigerators SECTION 07
heaters and retardant ABS covers for
some refrigerators. universal ignitor boards. The Thermistor Simulator
These two basic boards These clear covers offer protection allows the technician to quickly
have spade high voltage from contamination and moisture while determine if the electronics are
connectors are all “3 try” boards. The still allowing you to see the diagnostic responding properly to changes in thermistor
replaceable fuse protects the board from LED. Small cover for Small (3.25”x4.25”) values. Also it allows the Thermistor Simulator
short circuits LED turns red when the ignitor boards and Large covers for Large to quickly determine if the “Eyebrow” temp
board activates the gas valve. The boards (3.5”x5.10”) ignitor boards. Covers are for setting is communicating with the power
also have very good surge protection and use in water heaters and refrigerators only. board to determine how cool the refrigerator
tolerance to ripple voltage from “battery Not for use in Furnaces. should get. This Thermistor Simulator for
charger type” converters. Norcold® refrigerators DOES NOT test
100508 UIB S Cover Small - 3.25”x4.25” $14.50
Ignition Board Small 4.25” x $13.50 thermistors. It is an “INEXPENSIVE”, “TIME
100500 UIB S Spade $153.00 100509 UIB L Cover Large (3 1/2” x 5 1/10”)
3.25” Universal SAVING” trouble shooting Tool to be used
100501 UIBSPOST UIB-S Post Dinosaur Board $153.00 by technicians. For use with most Norcold® APPLIANCES
refrigerators. 1 year factory warranty.
Universal Ignitor Trouble Shooting 100531 THERM SIM Thermistor Simulator Norcold $78.62
NORCOLD
Board 12V Exerciser

Dinosaur Use the Micro P-711 to
Universal Ignitor replace all “Black Box”
Board 12V for boards beginning with part Ignitor Board Tester
furnaces with fan control. #293. Does not replace “Black
Box” boards beginning with part #385.
100507 UIB07 FAN 50 PLUS PINS Fan Control Small $178.00 Built-in surge protection. Protects from
installation errors and the RV Power supply.
Park Model Fuse protected on the 120 VAC circuit, 12
VDC supply and the DC element. Improved
Furnace Board thermocouple circuit to eliminate recurring
check light problem. Food saver feature
keeps the refrigerator operating if the
24 VAC operation eyebrow board or communication link
“For park model fails. Built in control allows temperature
furnaces”. 3 try (Cut adjustment in the “Fixed” temperature
a jumper for single Americana and Freedom series refrigerators. Includes both the IMT-12P Tester, and the
try), microcontrolled, The temperature control also allows Test Adapter Package. For testing 12-volt
Diagnostic LED, Fuse & Surge protected, compensation for aging and production DC Ignitor boards, fan control boards and
3.43” x 5.10”. Three year warranty reignitor modules.
variations in those units that have the -1-2-
100505 UIB 24 VAC For 24 VAC Park Model Furnaces $153.00 3-4-5- temperature control on the operator 100499 IMT-12P Tester w/Adapter Pkg For 12VDC $280.81
Circuit Boards
Dometic/Atwood Board panel. Built-in microcontoller for highly
reliable operation. Universal 2-way or 3-way
(AC / DC / Gas) operation. Install optional
Combo DSI board with fuse (provided) for 3-way operation.
the 110v pins for water 120710 P711EX Micro P-711 Exerciser Tester $199.00
heaters using the pin QuikChek Ignitor
style connections. Can
also be used without
the pin connections as a Thermistor Simulator Board Tester
standard 12v DC DSI board. PRICES SUBJECT TO CHANGE WITHOUT NOTICE
100510 UIB 64 Combo Igniton Board $221.00 For Dometic 12 VDC - This handy
Tester plugs into a
Time Delay Relay Refrigerators cigarette lighter.
Tests most
12 VDC Ignitor
Our replacement Time delay relay A handy new simulator used to boards that do not use an
is for use in older furnaces that determine if the Micro P-711 and external sense wire. Small
use a standard 12VDC ignitor all other Dometic® “black box” boards and easy to use, toss it in the tool box
board. The TDR has a 4 and their replacements are responding to keep it handy. 1 Year factory warranty.
second delay before applying to thermistor changes. Plugs into the Easy to use: Plug the tester onto the
power to the fan motor, and thermistor connector on the lower control board, Hook up the spark wire, Plug the
a 2 minute cool down period at the board in back of the refrigerator. 1 year tester into the cigarette lighter, Wait for
end of the heat cycle before removing power factory warranty. the spark, Push the flame sense button to SPECIAL ORDER
from the fan motor. Size: 1.5” x 1.5” THERM SIM check the sense circuit.
120806 12VTDR Time Delay Relay $67.43 100530 DOMETIC Thermistor Simulator Dometic $78.62 120711 QUIKCHEK Tester For 12VDC Ignitor Boards $92.51