Page 208 - 2025_ArrowCatalog_Complete
P. 208
206 DINOSAUR™ CIRCUIT BOARDS
Universal Ignitor Trouble Shooting Test Adapter For
SECTION 07 Dinosaur Use the Micro P-711 to Test Adapter for Atwood’s® AC/Gas Water
Atwood AC/Gas
Board 12V
Exerciser
Water Heater Board
replace all “Black Box” boards
Universal Ignitor
Board 12V for
beginning with part #293. Does
Heater Board For use with the
not replace “Black Box” boards
furnaces with fan control.
beginning with part #385. Built-in surge
100507 UIB07 FAN 50 PLUS PINS Fan Control Small
$178.00
• Tests Atwood’s® AC/
protection. Protects from installation errors
Gas water heater
and the RV Power supply. Fuse protected IMT-12P Tester
board that both
Park Model
on the 120 VAC circuit, 12 VDC supply and
a 4 & 6 position
APPLIANCES 24 VAC operation refrigerator operating if the eyebrow board • Instruction sheet $95.21
the DC element. Improved thermocouple
edge connectors
Furnace Board
circuit to eliminate recurring check light
• Tests Dinosaur
problem. Food saver feature keeps the
Electronics new AC/Gas Adapter Kit with
a UIB S installed.
or communication link fails. Built in control
“For park model
allows temperature adjustment in the “Fixed”
• 1 year factory warranty
furnaces”. 3 try (Cut
temperature Americana and Freedom series
• Note: This product will not work with the
a jumper for single
refrigerators. The temperature control
Fenwall® Testers
try), microcontrolled,
also allows compensation for aging and
AC/GAS TEST AC/Gas Water Heater Board
Diagnostic LED, Fuse & Surge protected,
production variations in those units that have
100509
Tester Atwood
ADAPTER
the -1-2-3-4-5- temperature control on the
3.43” x 5.10”. Three year warranty
operator panel. Built-in microcontoller for
100505 UIB 24 VAC For 24 VAC Park Model Furnaces $153.00
or 3-way (AC / DC / Gas) operation. Install
Dometic/Atwood Board
optional fuse (provided) for 3-way operation.
$239.68
120710 P711EX
Micro P-711 Exerciser Tester
Combo DSI board with highly reliable operation. Universal 2-way Ignitor Board Tester
the 110v pins for water Thermistor Simulator
heaters using the pin
style connections. Can For Dometic
also be used without
the pin connections as a
standard 12v DC DSI board. Refrigerators
100510 UIB 64 Combo Igniton Board $221.00
A handy new simulator used to
determine if the Micro P-711 and all
Time Delay Relay other Dometic® “black box” boards and their Includes both the IMT-12P Tester, and the
replacements are responding to thermistor
changes. Plugs into the thermistor connector Test Adapter Package. For testing 12-volt
Our replacement Time delay relay on the lower control board in back of the DC Ignitor boards, fan control boards and
is for use in older furnaces that refrigerator. 1 year factory warranty. reignitor modules.
use a standard 12VDC ignitor 100530 THERM SIM Thermistor Simulator Dometic $78.62 100499 IMT-12P Tester w/Adapter Pkg For 12VDC $280.81
board. The TDR has a 4
Circuit Boards
SPECIAL ORDER second delay before applying Thermistor Simulator
DOMETIC
power to the fan motor, and
a 2 minute cool down period at the
end of the heat cycle before removing power
from the fan motor. Size: 1.5” x 1.5”
120806 12VTDR Time Delay Relay $67.43 For Norcold QuikChek Ignitor
Refrigerators Board Tester
PRICES SUBJECT TO CHANGE WITHOUT NOTICE
Universal Ignitor The Thermistor Simulator
Board Cover allows the technician to quickly 12 VDC - This handy
Tester plugs into a
determine if the electronics are
cigarette lighter.
responding properly to changes in thermistor
Tough, clear, fire values. Also it allows the Thermistor Simulator Tests most
retardant ABS covers for to quickly determine if the “Eyebrow” temp 12 VDC Ignitor
universal ignitor boards. setting is communicating with the power boards that do not use an
These clear covers offer protection board to determine how cool the refrigerator external sense wire. Small
from contamination and moisture while should get. This Thermistor Simulator for and easy to use, toss it in the tool box
still allowing you to see the diagnostic Norcold® refrigerators DOES NOT test to keep it handy. 1 Year factory warranty.
LED. Small cover for Small (3.25”x4.25”) thermistors. It is an “INEXPENSIVE”, “TIME Easy to use: Plug the tester onto the
ignitor boards and Large covers for Large SAVING” trouble shooting Tool to be used board, Hook up the spark wire, Plug the
(3.5”x5.10”) ignitor boards. Covers are for by technicians. For use with most Norcold® tester into the cigarette lighter, Wait for
use in water heaters and refrigerators only. refrigerators. 1 year factory warranty. the spark, Push the flame sense button to
Not for use in Furnaces. THERM SIM check the sense circuit.
100508 UIB S Cover Small - 3.25”x4.25” $14.50 100531 NORCOLD Thermistor Simulator Norcold $64.23 120711 QUIKCHEK Tester For 12VDC Ignitor Boards $92.51