Page 567 - 2025_ArrowCatalog_Complete

PEX FITTINGS 565

PEX PEX Center Drain PEXLOCK Bypass Valve

Male Tee Valves SECTION 16

Tee with a female A drain valve
pipe thread and a Flair-It with Flair-It
connection. connections on
both ends.
602329 06822 1/2” x 1/2” x 1/2” Tee $4.05
602314 06884 1/2”P x 1/2”P Drain Angle Valve $12.50
PEXLOCK Tees 602475 06882 3/8”P x 3/8”P Drain Angle Valve $15.88 Three-way bypass shut off valve with

PEXLock clamps.
602564 30910 1/2” P x 1/2” P x 1/2” P Shut-Off $13.73
PEX Angle

Stop Valve PEX 3-Way Valve

A 90 degree FRESH WATER
PexLock Male pipe thread adaptor. valve with Flair-It Flair-It 3-Way Water Heater
602554 30820 1/2” Tee w/Clamp $3.63 connections on Valve. 1/2inch all 3
hubs. This will work on
602555 30822 1/2” x 3/8” Tee w/Clamp $4.65 both ends. PEX and Polybutylene
602556 30831 3/8” Tee w/Clamp $2.58 602467 06885 1/2” x 1/2” Angle Stop Valve $12.54 Pipe. Easy to Install in
your In-Line or Water
Heater. Inexpensive
way to by-pass for winter storage.
PEX Fitting PEX Straight 602443 06914 1/2”P x 1/2”P x 1/2”P Center $13.92

Caps Stop Valves 602480 06910 1/2”P x 1/2”P x 1/2”P Water Heater Bypass $13.94
602481 06912 1/2” P x 1/2” MPT x 1/2” P
$14.08
Use to cap off a Flair-It fitting.
Flair-It straight stop
602312 06860 1/2” FTG $2.93
602460 06859 3/8” FTG $3.35 valve 1/2” or 3/8”. PEXLOCK Clamp
602462 06861 3/4” FTG $3.94 602313 06880 1/2” x 1/2” Straight Stop Valve $11.42
602465 06879 3/8” x 3/8” Straight Stop Valve $13.34 3-pack PEX ring clamps

Transition Fittings 602565 30760 3/8” PEX Clamps 3Pk $1.89

Transition from PEXLOCK Straight 602566 30761 1/2” PEX Clamps 3Pk $2.47
copper to Pex
Tubing, copper to Stop Valve
copper or copper
to CPVC.
Flair-It straight stop Saniprene
602478 06343 1/2” x 1/2”; 5/8” OD $8.57 valve 1/2” or 3/8”.
602479 02347 3/4” x 3/4” $7.25 Swivel Seals PRICES SUBJECT TO CHANGE WITHOUT NOTICE
PEX Plug Couplings 602563 30879 1/2” x 1/2” Straight Stop Valve $8.22 602317 06435 1/2” Saniprene Swivel Seal $0.52

602445 06465 3/4” Saniprene Swivel Seal $0.73
Used for inserting a
plug into the end of
a pipe. 3/8” and 1/2”
fittings will fit PEX or PEX Bypass
polybutylene tubing.
3/4” fittings will fit PEX Fitting Wrenches
PEX tubing only, to use on polybutylene Valve
use adapter. Used to tighten
Flair-It fittings.
602461 06863 1/2” Plug $4.05 Flair-It water bypass SPECIAL ORDER
with 90 degree turn.
602463 06862 3/8” Plug $2.84 602468 06391 1/2”- 3/4” PEX Fitting wrench $11.49
602464 06864 3/4” Plug $4.22 620048 06900 3/8” P x 3/8” P x 3/8” P Shut-Off $14.43 602485 06390 3/8” P x 1/2” PEX Fitting Wrench $16.68